For embedded applications, if you need high-performance, low-power, and high-durability flash memory with small form factor, versatile features, and competitive price, the W25Q128JVPIQ is a solid choice. Its compatibility with a wide range of platforms and applications, along with its long-term reliability, makes it highly popular in embedded systems.
At ANDESOURCE, we supply this flash memory as part of our broad range of electronic components, offering fast delivery, expert guidance, stringent quality control, competitive prices, and reliable sourcing.
Now, let’s dive into the detailed specifications and features of the W25Q128JVPIQ.
Key Performance at a Glance
Product Attributes | Description |
High-Speed Performance | 133MHz Single, Dual/Quad SPI clocks 266/532MHz equivalent Dual/Quad SPI 66MB/S continuous data transfer rate |
Flexible Storage Options | Uniform Sector/Block Erase (4K/32K/64K-Byte) Program 1 to 256 byte per programmable page Erase/Program Suspend & Resume |
Low Power | Single 2.7V to 3.6V power supply current consumption as low as 1µA for power-down |
Endurance and Data Retention | Minimum of 100,000 program-erase cycles per sector. Data retention of over 20 years. |
Advanced Security Features | Software and Hardware Write-Protect Power Supply Lock-Down Special OTP protection Top/Bottom, Complement array protection Individual Block/Sector array protection 64-Bit Unique ID for each device Discoverable Parameters (SFDP) Register 3X256-Bytes Security Registers with OTP locks Volatile & Non-volatile Status Register Bits |
Wide Temperature Range | Operates from -40°C to 85°C. |
Memory Type | Non-Volatile |
Space-Saving Packages | 8-pin SOIC 208-mil 16-pin SOIC 300-mil (additional /RESET pin) 8-pad WSON 6x5-mm / 8x6-mm 24-ball TFBGA 8x6-mm (6x4/5x5 ball array) 24-ball WLCSP |
Top Reasons to Choose the W25Q128JVPIQ
High Capacity (128Mb / 16MB)
W25Q128JVPIQ offers a 128Mb (16MB) memory size, providing ample space for storing firmware, configuration data, and other critical information in embedded applications.This memory size is suitable for devices that do not require extensive storage but still need enough capacity for essential system code and data.
SPI Interface (Standard and High-Speed Versions)
W25Q128JVPIQ uses the SPI (Serial Peripheral Interface) standard, which is a widely adopted, cost-effective serial communication protocol. The SPI interface reduces the number of pins required for communication, making it ideal for space-constrained designs.And it supports Dual I/O and Quad I/O modes for faster data transfer, allowing up to 4 bits of data to be read or written in parallel. This improves performance significantly compared to traditional SPI, especially for read operations.
Fast Read and Write Speeds
W25Q128JVPIQ supports high-speed data transfer, with SPI clock frequencies of up to 133MHz, enabling faster reads and writes.This is particularly beneficial for applications that require quick access to stored data or need to minimize latency.
Low Power Consumption
W25Q128JVPIQ is designed to consume low power, which is ideal for battery-powered or energy-efficient applications. The device runs on a single power supply ranging from 2.7V to 3.6V and consumes as little as 1µA in power-down mode to further conserve energy when the chip is not in use.This makes it suitable for mobile devices, wearables, and IoT applications where power efficiency is crucial.
Long Data Retention and Durability
W25Q128JVPIQ offers data retention of up to 20 years, ensuring that data remains intact for long periods without power.With a high endurance rating of 100,000 program-erase cycles per sector, it is well-suited for applications that require frequent updates, such as firmware storage in embedded systems.
Versatile Erase and Programming Modes
W25Q128JVPIQ supports several flexible erase and programming modes, including Sector Erase, Block Erase, and Chip Erase. This allows for efficient data management, ensuring that only specific areas of memory are rewritten or erased without affecting the entire chip.These modes help in optimizing performance and reducing unnecessary wear on memory cells.
Small Package Size and Integration
W25Q128JVPIQ comes in small packages, making it ideal for compact devices or systems with limited space.The integration of memory, control logic, and interface circuitry in a single chip reduces board complexity and cost.
Wide Compatibility
W25Q128JVPIQ is compatible with a wide range of microcontrollers and processors, as SPI is a standard interface used in many embedded systems.Its compatibility with different I/O modes (Single, Dual, Quad SPI) ensures it can be integrated into various platforms and systems with differing performance requirements.
Cost-Effective
W25Q128JVPIQ combines high-speed, reliability with exceptional value, offering an excellent price-to-performance ratio.This makes it an attractive choice for manufacturers looking for a balance between performance and cost.
Versatile Applications
W25Q128JVPIQ is a versatile and reliable flash memory solution, widely used across a range of industries and applications:
Embedded Systems: Ideal for storing firmware, configuration data, and operating parameters in microcontroller-based designs, ensuring fast boot times and reliable operation in embedded devices.
Automotive: Used for firmware storage in infotainment systems, ECUs (Electronic Control Units), and sensor data storage, contributing to vehicle reliability and performance with its high endurance and long data retention.
Networking Equipment: Essential for routers, switches, and modems, the W25Q128JVPIQ ensures quick, reliable storage for firmware, configurations, and data buffers, supporting efficient network operation.
Industrial & IoT Devices: Found in sensors, controllers, and industrial machinery, where it stores device settings, logs, and operational data, offering durability and low power consumption for connected devices in industrial environments.
Why Choose ANDESOURCE for Your Electronic Component Sourcing?
Sourcing electronic components can be a challenge, but with ANDESOURCE, we make it easy. By collaborating with top-tier manufacturers, we ensure you receive only the best, most reliable electronic components at competitive prices. Our team of experts works closely with you to understand your unique requirements and guide you toward the perfect components. We ensure every part meets the highest standards through rigorous quality control and prioritize fast delivery to keep your projects moving without delays.
Reach out to ANDESOURCE today for a hassle-free sourcing experience.
